BG-Clean™ 402 is a general purpose industrial cleaner specifically formulated for cleaning oil and grease from hard surfaces when environmental impact is of great concern. The product's neutral pH, low toxicity, and complete bio degradability make it very safe for use in the most sensitive situations. BG-Clean™ 402 also can be used to speed the biodegradation of oil in water and soil.

BG-Clean™ 402 offers the user effective, non-hazardous cleaning power for use in the most sensitive environmental situations.

BG-Clean™ 402 offers significant advantages compared to other cleaner including:

• BG-Clean™ 402 can be used on a variety of surfaces including wood, rock, plastic, vegetation, etc. . .
• The contaminant is detackified and will not readhere to the cleaned surface.
• BG-Clean™ 402 is fast and effective on a wide range of contaminants
• BG-Clean™ 402 can be used to enhance the biodegrability of the contaminants it cleans, thus helping to further reduce and speed up the cleanup process.
• BG-Clean™ 402 mixes easily with water and can be diluted more than 100 times.
• BG-Clean™ 402 has a neutral pH, low toxicity, and is 100% biodegradable.

Product Application

Use BG-Clean™ 402 at a 1% to 20% dilution in water. Apply by hand or high pressure washer. When applying by hand, use a stronger concentration; when applying by high pressure use lower dilutions.

Allow BG-Clean™ 402 to penetrate for 1 to 5 minutes and rinse with water (hot water under high pressure will increase efficiency).

Use BG-Clean™ 402 to enhance the biodegradation of oil as follows: use a 5% dilution in soil, use a 2% dilution in water, aerate the mix continuously, temperatures must be above 42F, and contamination must be below 20,000 ppm. Consult your distributor for expert advice prior to useing 402 as a degrader.