The BG-Clean™ 1103 series of products consists of three distinct products, 1103N for general odor elimination, 1103L for odor elimination with the added benefit of strong liquefying power, and 1103E for odor elimination with the added benefit of enhancing the biodegradation process.
Cleans and eliminates foul odors from:
|
|
|
|
|
|
|
|
|
|
|
|
| BG-Clean™ 1103N | BG-Clean™ 1103N is an excellent odor control product for application on a variety of odor causing materials ranging from waste water to manure and compost. Apply BG-Clean™ 1103N in liquid form. Simply mix 1 pound of BG-Clean™ 1103N to 5 to 10 gallons of water and apply with a Hudson type sprayer to topical areas or with a metering system to wastewater treatment systems. |
| BG-Clean™ 1103L | BG-Clean™ 1103L has the same high powered odor eliminating capabilities as 1103N in addition to having the ability to liquefy many organic solids. This liquefication process leaves many organic sludges in a pumpable state for easier reclamation. Apply BG-Clean™ 1103L in its dry powder form. This can be done by means of a venturi or other dry additive inducer or it may simply be broadcast over the area to be treated. |
| BG-Clean™ 1103E | BG-Clean™ 1103E is an excellent odor eliminator with the added benefit of having biological degradation enhancers for speeding the biodegradation process in most organics. The bio-enhancement technology behind BG-Clean™ 1103E has been validated by the Environmental Protection Agency as well as by The University of Alabama. BG-Clean™ 1103E should be applied as a liquid. To apply simply mix 1 pound of 1103E to 5 to 10 gallons of water and spray or meter the product into the area to be treated. |